Nuestra tienda
Trackbar + Steering Gear Bracket heavy duty Steer Smarts
Número de producto:
1220.31
Número OEM
79040002
Vehículo
Wrangler JL 18 - |
Gladiator JT 20 - |
El tiempo de entrega
Descripción
Información sobre el producto "Trackbar + Steering Gear Bracket heavy duty Steer Smarts"
Steer Smarts YETI XD™ Sector Shaft Brace With Frame Side Track Bar Reinforcement Bracket
The YETI XD™ JL/JT Sector Shaft Brace With Frame Side Track Bar Reinforcement Bracket was engineered to bolt onto the stock track bar mount on the frame. The purpose of this piece is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing/deflecting/moving when cycling your steering system side to side.
The second part of the product is to reinforce the frame side track bar mounting location to help minimize any deflection of this bracket and ensuring that the mount doesn't break under extreme stress.
If you've had the TSB (technical service bulletin) work performed on your pre-2021 Wrangler or Gladiator, you will want to use the 4x short gear bolts. The fastener bag provides bolts for both aluminum and steel gear variations. The Aluminum box requires 2x short gear and 2x long gear bolts where the Steel box requires 4x short gear bolts.
Note - Mojave JT and Diesel JT Gladiators require slight modification
Features
Easy bolt-on installation with minimal modification needed
1/4" Wall steel laser-cut bracket
1/2" steel Sector Support with Sealed Roller Bearing
All upgraded fasteners included
E-coated for corrosion resistance
MADE IN THE USA
The YETI XD™ JL/JT Sector Shaft Brace With Frame Side Track Bar Reinforcement Bracket was engineered to bolt onto the stock track bar mount on the frame. The purpose of this piece is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing/deflecting/moving when cycling your steering system side to side.
The second part of the product is to reinforce the frame side track bar mounting location to help minimize any deflection of this bracket and ensuring that the mount doesn't break under extreme stress.
If you've had the TSB (technical service bulletin) work performed on your pre-2021 Wrangler or Gladiator, you will want to use the 4x short gear bolts. The fastener bag provides bolts for both aluminum and steel gear variations. The Aluminum box requires 2x short gear and 2x long gear bolts where the Steel box requires 4x short gear bolts.
Note - Mojave JT and Diesel JT Gladiators require slight modification
Features
Easy bolt-on installation with minimal modification needed
1/4" Wall steel laser-cut bracket
1/2" steel Sector Support with Sealed Roller Bearing
All upgraded fasteners included
E-coated for corrosion resistance
MADE IN THE USA
Vehículo: | Gladiator JT, Wrangler JL |
---|
Valoraciones
Iniciar sesión